Admin Login, Password, and IP

Before even beginning the discussion, one needs to be clear about the concept of an IP Address. The IP address or the Internet Protocol address is a numerical tag. It is assigned to each and every computer that is a part of a computer network.

As far as the address is concerned, the same is used to obtain the router configuration details. The manufacturers prefer the address to define the LAN or Local Area Network IP Address. Admin Login, Password, and IP

The two main functions of an IP address are:

  • Location Addressing or defining the location of the device connected, and,
  • Identifying the network interface.

Read Also:

  3. Confirm Form Resubmission

What Is IP Address?

Not all the destinations on the internet have a public address. is one of the private addresses. Most of the ADSL modems use to get the configuration details of a particular router system. This is a default host address of the version 4 of IP (IPv4).

Nonetheless, it is important that the user type the address correctly on the address bar to avoid any kind of fatal errors. Secondly, the address gives us the information about the management of the router console of the network your device is connected to. IP Admin Login

To access your router admin portal, you need to follow the following steps:

Step 1: Check the network connectivity of your device. It should be connected either through Ethernet or Wireless cable.

Step 2: Open your preferred browser that you normally use to access the internet.

Step 3: Type any one of the following in the address bar: or IP Admin Login

Step 4: Press Enter to visit the login page of your router or modem.

Step 5: Enter the username and password of your router. You may also check your password if you have forgotten the same.

Step 6: After clicking enter, you will be passed into a configuration page where you can change the settings. IP Admin Page

How to Find the Router’s IP Address?

It is not necessary that the IP address of your router is, it is a possibility that the address can be or some other. All you have to do is, to find your default address.

You can do this by going through the list of default router IP addresses and find the same. We have mentioned the router’s default username and password list below.

It isĀ  possible that your router’s IP address is not It can be,,, or any other IP address.

Router’s Default Username and Password List

You can obtain the username and the password of your router from the router manual which comes along with the router at the time of installation. If you have misplaced the manual, no need to worry, you can see this table in order to retrieve the default username or password.

Router Manufacturer IP address User Name Password
admin admin/password
Cisco admin admin
admin admin
admin admin
Netgear admin admin
Netgear admin password
admin admin
(none) MiniAP
Billion admin admin

Many manufacturers have router models that have different passwords and usernames. The list in the link will tell you the default passwords and usernames of

What To Do If I Forget Router Username and Password?

It is not a possibility at a human level to remember the passwords. One can very easily get the passwords and usernames by following few steps. There are two ways to fight this problem. One, you can refer to the manual of router credentials as presented in the above link, the other and the preferred one, by resetting the router with IP address Follow the steps given below:

Step 1: First, find the reset button at the back of the router.

Step 2: Take a pointy object and prepare to press the button.

Step 3: Finally, press and hold the button for at least 10-15 seconds.

How to Reset IP Address of Router

By doing this, you will reset the router credentials to the default settings of Now, you can easily put the default username and passwords in the login tab and find the router details on the screen.

How to Troubleshoot IP and Router Errors?

There may be times when your router might not agree with your commands or, might not be actively participating in the process of IP transfer. This can happen due to a few Router Errors. There are, in general, 5 types of router errors and one can solve them by troubleshooting. There are a few things that need to be kept in mind before approaching the process of troubleshooting. We have discussed the following:

1. By Checking Power Supply

The majorly found error is generated through the most basic problem of power supply. We can solve this problem very easily by checking the connection of the router to the problem. This is a common problem and does not require any professional knowledge to troubleshoot. Generally, when the small LED is light up in the router to indicate the power supply.

2. Using Proper Quality Cables

This depends upon your Internet Service Provider. A user should always prefer the best transmission cables while dealing with high-speed networks. We cannot overlook the role of the connecting wires. The quality of the wire is necessary to be kept in mind to ensure the smooth functioning of the network protocols.

3. By Checking the Router Signals

The router signals are the responses of the router. If the router is unable to perform a function, it might be the role of poor routing signals. The router supports few LED lights that determine the status of the router signals. If such a problem occurs, one can look for the correctness in the working of these LEDs.

Also Read:


In conclusion, a user can do wonders by changing the router settings. All he or she has to do is to understand the working of the IP Address and they are good to go. The internet provides so many sources from where you can gather your router credentials.

By following the aforementioned processes, you can ensure that the network you use for surfing the network works as per your commands.

The problems in your routers can also troubleshoot while following the simple steps. This way, you can also increase the security of your network-router connection. The user, at last, has the entire control of the process.